I How To Carry Out Iris Reader Recognition - Panasonic BM-ET200 Operating Instructions Manual

I How to Carry Out Iris Reader Recognition

The following is how to control the iris reader when a user (you), whose iris data has been enrolled in the iris server, carries out
recognition. This document will explain about:
• Recognition by an iris reader only
After iris data enrollment, iris data recognition is carried out by an iris reader.
• Recognition by an iris reader and a card reader
After iris data enrollment, iris data recognition is carried out by an iris reader and a card reader. The card reader can be
used in the network mode only.
Notes:
• To carry out the recognition by an iris reader only, your iris data needs to have been sent to recognition iris readers,
enrolled in the iris server, or written into a card. If your iris data has not been enrolled, refer to system administrators for
enrollment.
• Depending on the settings by the system administrators, voice guidance may not be output.
G Recognition by an Iris Reader
No.
Stand (Sit down) in front of the iris reader.
1
Move your face so as your eyes are positioned within 50 cm {1.64 ft.}
from the iris reader.
2
• The voice guidance will say, "Please look into the mirror."
• The distance indicator or voice guidance will start.
Position your eyes in the mirror by referring to "How to Position Your
3
Eyes in the Mirror" (p. 68).
Move your position slowly by following the distance indicator or voice
guidance.
• When the distance between the iris reader and you is too far, the voice guidance
4
will say, "Please move a little closer."
• When the distance between the iris reader and you is too short, the voice guidance
will say, "Please move back a little."
When your eyes are positioned within the capturing range, all the five
5
lamps will light up, and your eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
The recognition result is announced by a result indicator.
• When you are recognized as an enrolled user, "accept" will light up.
6
The voice guidance will say, "Identification completed."
• When the recognition is invalid, "reject" will light up.
The voice guidance will say, "Sorry you were not identified."
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
73