Setup (Network Mode); I Connection And Setup Flow - Panasonic BM-ET200 Operating Instructions Manual

Setup (Network Mode)

This section describes the settings of network mode.
The administration software is used for setup.
Refer to BM-ES200 Operating Instructions (supplied to Administration Software BM-ES200) for details on network mode opera-
tion.

I Connection and Setup Flow

Connection and setup are performed before the iris reader is used in the network mode.
No.
Detach the front cover from the iris reader. (Refer to p. 28.)
1
Make sure that the power is not supplied to the iris reader.
Perform the setup switch setting.
2
Set the operation mode to the network mode.
Attach the front cover to the iris reader. (Refer to p. 31.)
3
Supply the power to the iris reader.
4
Perform the following settings using the web browser on the PC.
5
• Register administrators. (Refer to p. 64.)
• Set up the iris reader. (Refer to p. 65.)
Procedure
ON
1 2 3 4 5 6 7 8
Set according to operations.
63