I Recognition By An Iris Reader And A Card Reader - Panasonic BM-ET200 Operating Instructions Manual

Notes:
• If the recognition becomes invalid frequently, refer to "Troubleshooting" (p. 80).
• Depending on capturing conditions, it will take approx. 10 seconds between capturing and recognition.
• The recognition result will be transferred to the access control panel, accompanied by the user information such as the ID
data, etc.

I Recognition by an Iris Reader and a Card Reader

No.
Stand (Sit down) in front of the iris reader.
1
Follow the directions by system administrators or operators.
Pass a card through the card reader.
2
Note: If the card reader is a non-contact type, position the card close to the card read-
er.
Move your face so as your eyes are positioned within 50 cm {1.64 ft.}
from the iris reader.
3
The distance indicator or voice guidance will start.
Position your eyes in the mirror by referring to " How to Position Your
4
Eyes in the Mirror" (p. 68).
Move your position slowly by following the distance indicator or voice
guidance.
• When the distance between the iris reader and you is too far, the voice guidance
5
will say, "Please move a little closer."
• When the distance between the iris reader and you is too short, the voice guidance
will say, "Please move back a little."
When your eyes are positioned within the capturing range, all the five
6
lamps will light up, and your eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
The recognition result is announced by a result indicator.
• When you are recognized as an enrolled user, "accept" will light up.
7
The voice guidance will say, "Identification completed."
• When the recognition is invalid, "reject" will light up.
The voice guidance will say, "Sorry you were not identified."
74
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept