Panasonic BM-ET200 Operating Instructions Manual page 57

Delete the Operater's Privilege from Users.
The following is how to delete the operator's privilege from a user.
No.
Press [–] [0] [2] [enter].
1
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to delete the operator's privilege.
Example: When ID is 01, press [0] [1] [enter].
The voice guidance will say, "Registration has been completed."
2
Notes:
• When you delete the operator's privilege from other users, repeat this step.
• When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
3
say, "Registration has been failed.", and the iris reader will return to the status before
operation.
G Delete a User
The following is how to delete a user.
No.
Press [-] [0] [1] [enter].
1
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to delete.
Example: When the ID is 01, press [0] [1] [enter].
The voice guidance will say, "Registration has been completed."
2
Notes:
• When you delete another user, repeat Step 2.
• When the voice guidance says, "Registration has been failed.", retry Step 2.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
3
say, "Registration has been failed.", and the iris reader will return to the status before
operation.
Procedure
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
57