Silvercrest SEAD 1800 A1 Operating Instructions Manual page 10

Operating elements
1 Lid
2 Heat insulated handles
3 Control dial for "Minutes " (MIN) and, at the same time, TIMER button
4 Preserving grill
5 Display indicator "Minutes" (MIN)
6 Display indicator "Current Temperature" (CURRENT TEMP)
7 Display indicator "Set Temperature" (SET TEMP)
8 Cable storage
9 Control dial for "Temperature" ( °C) and, at the same time, START/STOP button
0 Pouring tap
q Tap lever
Setting up and connecting to the mains
power supply
Unpacking
♦
♦
Appliance set up and making ready for use
■
■
■
■
WARNING! PROPERTY DAMAGE!
►
►
■
SEAD 1800 A1
IB_411310_SEAD1800A1_LB8.indb 7 IB_411310_SEAD1800A1_LB8.indb 7
Remove all parts of the appliance and the operating instructions from the
packaging.
Remove all packing material.
Completely unwind the power cable from the cable storage 8.
Place the appliance on a level and slip-free surface. Ensure that a mains
power socket is easily accessible.
Clean the appliance as described in the chapter "Cleaning and Care".
Insert the plug into a mains power socket. The display lights up, a signal tone
is heard.
NEVER operate the appliance in a no-load condition! The appliance
could be irreparably damaged!
WARNING! RISK OF INJURY!
When it is hot, take hold of the appliance ONLY by means of the heat
insulated handles 2. Risk of Burns!
Add about 5 litres of water to the appliance and leave it to boil at 100 °C
for 20 minutes (see section "Switching the appliance on and off"). After the
water has boiled, pour it away.
GB │ IE │
7 ■
23.01.2023 16:19:55 23.01.2023 16:19:55