Silvercrest SEAD 1800 A1 Operating Instructions Manual page 16

■
Cleaning the pouring tap
To clean the tap 0 thoroughly, you can unscrew the tap lever q. The tap 0
cannot be unscrewed as this could lead to problems with the seal.
1) Screw the tap lever q anticlockwise off the tap 0.
2) Place the pouring lever q in a mild soapy solution and swirl it back and forth.
3) Rinse it off with clear water.
4) To clean the pouring tap 0 allow a mild soapy solution to flow through it.
5) Afterwards, rinse the pouring tap 0 through with clear water.
6) Screw the tap lever q clockwise back onto the tap 0.
Scale removal
Deposits of scale on the bottom of the appliance lead to increased energy
consumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
1) Use a standard commercial descaling product. Proceed as described in the
2) After descaling, rinse the appliance with lots of clean and clear water.
NOTICE
►
SEAD 1800 A1
IB_411310_SEAD1800A1_LB8.indb 13 IB_411310_SEAD1800A1_LB8.indb 13
Clean the preserving grill 4 in a mild soapy solution and rinse it well with
clear water.
Should there be stubborn soiling on the inside of the pouring tap 0 use a
pipe cleaner or similar to remove it.
instructions for usage of the descaler.
At a low level of calcification (limescale), it is usually sufficient to wipe out
the inside of the appliance with a cloth soaked with vinegar. Afterwards,
rinse out the appliance with clean water and dry it.
GB │ IE │
13 ■
23.01.2023 16:19:58 23.01.2023 16:19:58