Table of Contents
Advertisement
4. Click the Monitor tab. Select an appropriate value from the Screen refresh rate list in
Monitor Settings.
5. Click OK.
6. If the following is displayed, click Keep changes.
< NOTE >
・ When you configure the resolution, color depth, and refresh rate, you must
choose from the options described in "5.1 Equipment Specification
(6) Supported resolutions".
・ The resolution options may include resolutions larger than the resolutions
supported by the connected display.
・ If you select a resolution larger than the maximum resolution supported by the
display, the display will black out.
・ After the driver is installed, the resolution is automatically set to the maximum
resolution supported by the connected display. When you change the
resolution, select a resolution smaller than that.
2-25
2. OPERATION
Advertisement
Table of Contents
