Hitachi HF-W6500 Instruction Manual page 26

Industrial computer
Hide thumbs Also See for HF-W6500:
Table of Contents

Advertisement

SAFETY INSTRUCTIONS (Continued)
⚫ Wear cotton gloves when replacing a drive in order to prevent failure
caused by static electricity. If you do not, the data stored on the drive may
get corrupted.
⚫ Make sure you check the correct procedure before you start the work.
If you do not follow the correct procedure, the data stored on the drive may
be lost.
⚫ If you want to use an SSD as a backup drive, you must update the backup
within one year. If the non-energized time exceeds one year, data might be
missing or lost.
⚫ If a drive failure prediction icon is displayed as the hardware status in the
notification area of the taskbar, do not use the drive as a backup drive.
Failure to heed this instruction might result in data becoming corrupted or
lost.
⚫ Wear cotton gloves when replacing a drive in order to prevent failure
caused by static electricity. If you do not, the data stored on the drive may
get corrupted.
⚫ Make sure you check the correct procedure before you start the work.
If you do not follow the correct procedure, the data stored on the drive may
be lost.
⚫ Wear cotton gloves when replacing a drive in order to prevent failure
caused by static electricity. If you do not, the data stored on the drive may
get corrupted.
⚫ Make sure you check the correct procedure before you start the work.
If you do not follow the correct procedure, the data stored on the drive may
be lost.
⚫ Do not use a used drive, regardless of the model, as a replacement drive.
Failure to heed this instruction might result in the equipment not operating
normally or data in the drive being lost due to inconsistent configuration
information.
⚫ Do not replace the two drives at the same time. If you do, the data gets
corrupted.
⚫ When you replace a drive, make sure that you set the drive into the offline
mode in the Hardware status window, and then remove that drive and mount
the replacement drive. If you mount or remove a drive when the hardware
status cannot be checked, for example, immediately after the OS starts, a
failure may result.
S-18
(Page 10-18)
(Page 10-19)
(Page 10-20)

Advertisement

Table of Contents
loading

This manual is also suitable for:

60

Table of Contents