Table of Contents
Advertisement
Name
LAN port
(1000BASE-T/100BASE-TX/
10BASE-T)
Table 1-1 Function of Each Part (3/5)
You can connect a LAN cable to a LAN port. (See "5.9.1 Connector
specification".)
⚫ Onboard LAN
Lamp
Lit in green A link is established.
Both the equipment and the remote device are powered
up and the connection over the twisted-pair Ethernet
cable is stable.
Off
No link is established.
• The equipment is not physically connected to the
network.
• The switching hub is not powered up.
• The connection over the twisted-pair Ethernet cable is
not stable.
• The driver settings have some errors.
Blinking in
Network data is being transmitted or received.
green
The blink interval changes depending on the traffic on
the network.
Lamp
Lit in
The link is established at 1000 Mbps.
orange
Lit in green The link is established at 100 Mbps.
Off
The link is established at 10 Mbps. Or no link is
established.
1-10
Function
ACT/LINK lamp
Status
Communication speed lamp
Status
1. GETTING STARTED
Communication speed lamp
ACT/LINK lamp
Advertisement
Table of Contents
