Hitachi HF-W6500 Instruction Manual page 141

Top
menu
Advanced I/O Device
Configuration
PCI
Configuration
Core Multi Processing
Hyper Threading
Intel SpeedStep Technology
No Execute Mode Mem Protection
MMIO Range
Legacy USB Support
Front USB Port
Internal gGraphics
Secure boot
Configuration
Table 5-16 BIOS Setup menu list
Setting item
Serial port A
Base I/O Address
Interrupt
Serial port B
Base I/O Address
Interrupt
PCI-Express Enable
Device Master
Slot #1 to #5
Option
ROM Scan
Link Speed AUTO
PCI Enable
Device Master
Slot #6 to #7
Latency
Timer
Option
ROM Scan
PCI Parity Error Detection Enabled
UEFI Secure Boot
Protected Signatures
Customized
Signatures
Secure Boot Option
Delete Platform key
Delete All Signatures Enter
Reset to Default
(2/3)
Default value
Enabled Do not change this setting.
3F8h
IRQ4
Enabled
2F8h
IRQ3
Enabled
Enabled Specifies whether to execute the
extension ROM. If you specify
Disabled for this setting, the extension
ROM will not be executed.
Enabled
0040h
Enabled Specifies whether to execute the
extension ROM. If you specify
Disabled for this setting, the extension
ROM will not be executed.
Enabled Do not change this setting.
Disabled
Disabled
Enabled
Dynamic
Enabled Specifies whether to activate USB
devices. If you specify Disable for this
setting, you can use a USB keyboard
only for the setup menu and after
Windows® starts.
Enabled You can change the setting of the front
USB port to enable or disable.
Auto Do not change this setting.
Disabled Do not change this setting.
Disabled
Disabled
Enabled
Enter
Enter
5-13
5. SPECIFICATION
Note