Startup Suppression On Serious Failure Detection - Hitachi HF-W6500 Instruction Manual

8.3 Startup Suppression on Serious Failure Detection

This equipment suppresses startup of the equipment when one of the following incidents is
detected during Windows® startup in order to protect the hardware.
1. Fan failure
2. Remote shutdown signal input
< NOTE >
In the case of a remote shutdown signal input, startup is suppressed only when
"Enable automatic shutdown at remote shutdown input" is selected in the RAS
setting window. If an automatic shutdown is not selected, startup is not suppressed.
For information about how to use the RAS setting window, refer to "HF-W6500
Model 60 RAS FEATURES MANUAL (WN-63-0100)". When a remote shutdown
signal input is detected, the equipment displays a blue screen and then stops.
For information about the STOP error code of this case, see "9.3 STOP Error
Codes".
8. MAINTENANCE OPERATIONS
8-11