Timer Setting Method - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
PC-LH3(A/B)

Stop operation
Point the transmitter towards the receiver kit and press "RUN/STOP" switch again. The RUN indicator (red) of receiver is
turned OFF and the operation is stopped.
The indications of setting temperature, fan speed and air flow angle are turned OFF.

4.4.4.5 Timer Setting Method


Function
This function is used to start or stop the unit operation at the setting time.
The timer setting is available for "ON TIME" and "OFF TIME".
• ON TIME: The operation is started after the set time is passed.
• OFF TIME: The operation is stopped after the set time is passed.
Press "ON TIME" or "OFF TIME". By repeatedly pressing "ON TIME" or "OFF TIME", the indication of setting time is changed.
The setting time is available at half hour intervals up to 10 hours and at one hour interval up to 23 hours after 10 hours.
Point the transmitter towards the receiver kit and press "SET" switch. The TIMER indicator (green) on receiver is turned
ON.
Cancel setting
To cancel the timer setting, point the transmitter towards the receiver kit and press "CANCEL" switch. The TIMER indicator
(green) on receiver is turned OFF.
181
TCGB0106 rev.0 - 12/2014
AUTO
TIMER
COOL
ON
The setting time for "ON TIMER"
is set to 6 hours.
Stop flashing
TIMER
COOL
ON
COOL
Flashing
4