Installation; Installation On Site Selection; Components List - Hitachi PC-ARF Technical Catalogue

5 Centralised remote controls
PSC-A32MN

5.2.2 Installation

5.2.2.1 Installation on site selection

Select a suitable place for handling and determine the installation place of the central station with the customer's accept-
ance.
Do not install the central station at such places as:
Where children can touch.
-
- Where the air from the air conditioner is directly discharged.
Before installing the controller, prepare the following items.
Parts
Switch Box
Power Supply Cable
H-LINK Cable (For control)
* The recommended cables are the model name of Hitachi Cable, Ltd.

5.2.2.2 Components list

Unpack the unit and check that:
• The package contains all the components (see next table).
• All components are in perfect condition.
Otherwise, contact the manufacturer.
Name
Central station
PSC-A32MN
M4x16L screws
Touch pen
Touch pen holder
Installation and operation manual
Connector Cord
Closed End Connector
Nylon Band
291
TCGB0106 rev.0 - 12/2014
Specification
JIS switch box for 2 switches (with cover) (JIS C 8340)
Cable specification: 1.25 to 2 mm
Recommended cable: 600V CV, CCV, CEV
Cable SPEC: 0.75 to 1.25 mm
2
Recommended cable: JKEPV-S, JKEV-S, CVV-S, CVV, 600V VCT
Quantity
1
運転/停止 電源
4
2
1
1
3
9
3
2
Comments
For controlling system operation
For fixing the central station.
For activating/deactivating the touch options on the
screen.
For holding the touch pen on the central station.
Installation and operation unit instructions.
For using external input/output functions (CN1~3).
For closing the wire end of the connection cord.
For fixing the cables.
5