8 Control support devices
THM-R2AE
8.6 THM-R2AE
8.6.1 Installation
8.6.1.1 Installation site selection
The thermistor for detecting room temperature is installed inside the remote sensor.
The installation position of the remote sensor should be determined in consideration with the following conditions:
•
where the average room temperature can be detected.
•
where is not exposed to the sun.
•
where a heat source is not located near the remote sensor.
•
where the discharge air from the air conditioner does not blow directly.
•
where is not affected by the outdoor air when opening /closing the door, etc.
8.6.1.2 Components list
Unpack the unit and check that:
•
The package contains all the components (see next table).
•
All components are in perfect condition.
Otherwise, contact the manufacturer.
Thermistor
Thermistor case
Thermistor case cover
Fixing screw
Installation and operation manual
742
TCGB0106 rev.0 - 12/2014
Name
Quant.
Comments
1
1
2
2
For fixing the accessory to the wall
1
Installation and operation unit instructions.
-
-
-