Description Of The Parts - Hitachi PC-ARF Technical Catalogue

5 Centralised remote controls
PSC-A64GT

5.1.2.3 Description of the parts

Colour LCD Display with Touchscreen

To operate and monitor the units through the touchscreen
display. It is operated by using the touch pen (accessory). The
touchscreen display will be automatically turned off when the
touchscreen is not operated for the given length of time.
Touch Pen

To operate the touchscreen of the central station.
Operation Indicator

To indicate the Run/Stop condition of the units
OFF: All the units are stopped.
ON (Green): One or more units are in operation.
Flashing (Red): In abnormal condition.
Power Indicator

To indicate the power condition of the central station
OFF (lamp): Power is turned OFF
ON (lamp): Power is turned ON

Fixing holes for Touch Pen holder
TB2

Terminals for connecting H-LINK control wiring (Non-pole)
TB3

Terminals for external input/output
1-2: External input 1
2-3: External input 2
4-5: External output 1
5-6: External output 2
TB1

Terminals for connecting the power cable
Power switch to turn OFF power supply

Use this switch to avoid an electrical shock when unit body is
opened
Fuse for H-LINK Transmission Line

For protection of H-LINK transmission line
DSW2

For terminating resistance. It is used for transmission line
recovery
Rotatory Switch for Address Setting

For address setting of controller
DSW1

For optional function setting
Fuse for Power supply

For protection of power circuit
N O T E
Remove the protection sheet on the LCD (liquid crystal display) before using this product.
D A N G E R
DO NOT remove the covers of parts marked with "
may cause a serious electrical shock.
221
TCGB0106 rev.0 - 12/2014
Right side
" for safety. If these covers are removed, contact with the inside components
Front side
Rear side
When unit body is open
Model: PSC-A64GT
5