Test Run Menu - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
PC-ARF
1 Setting of the operation lock, press " " and "
simultaneously for 3 seconds. The icon of " " will be turned
ON. Even when " " or " " is pressed, locked setting items
will be skipped.
2 Cancellation of the operation lock, press " " and "
simultaneously for 3 seconds. " " will be turned OFF, and
operation lock will be canceled.
N O T E
• Every time pressing " " and "
onds, the operation lock state will be switched alternately to locked/
unlocked.
• Select the functions to lock at the function selection setting. Contact
your distributor or dealer of HITACHI for detailed information.

4.1.4.2 Test run menu


Test run
1 Turn ON the power supply for all the indoor units.
2 For the models with the auto-address function, wait for 3 minutes approximately. The addressing is automatically
performed. (There is a case that 5 minutes are required according to the setting condition.) After that, select using
language from "Menu".
3 Press and hold " " (menu) and " " (return) simultaneously for at least 3 seconds.
a. The test run menu is displayed.
b. Select "Test Run" and press "OK". The test run settings are
displayed then.
N O T E
When "00" is indicated, the auto-address function may be performing. Cancel
"Test Run" mode and set it again.
67
TCGB0106 rev.0 - 12/2014
" (return)
" (return)
" (return) simultaneously for 3 sec-
Meeting Room
A/C
MODE SPEED
COOL
HIGH
OK
Meeting Room
A/C
MODE SPEED
COOL
HIGH
OK
SPEED
Test run screen
Test Run Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Function 5
SEL. ADJ OK ENT.
Test Run Setting: 2 units
COOL
MODE
SPEED MED
LOUV.
T-RUN TIME 120MIN
SEL. ADJ RUN
Test Run Setting: 00 unit
MODE COOL
SPEED MED
LOUV.
T-RUN TIME 120MIN
SEL. ADJ RUN
TEMP
TEMP
ADJ
4
01
/
03
RTN.
RTN.
RTN.