Operation; Test Run - Hitachi PC-ARF Technical Catalogue

Hide thumbs Also See for PC-ARF:

Table of Contents

6 Building air conditioning controls

CSNET WEB (PSC-A160WEB1)

6.1.5 Operation

Configuring the Hardware

After completing and checking the electrical installation, ensure that all the air conditioning units are running, and supply

power to CSNET WEB in order to configure the CSNET WEB interface

1 Connect the computer that will be used for configuration to CSNET WEB with a crossed Ethernet cable.

2 Insert the CD-ROM that is supplied with the CSNET WEB Packaged into the computer that is already connected. If the

Windows auto-start option is enabled, the installation programme will start automatically; if this option is not enabled,

execute the Autoinstall.exe application that is included in the CD-ROM.

3 The initial page for the installation will be displayed with the following options:

CSNET WEB Configurator: open the CSNET WEB Configurator interface in order to configure and install your

installation.

IP Change: Open the network settings of your system allowing change the IP of your computer.

CSNET WEB Software: execute the CSNET WEB Software from the CD.

Install CSNET WEB in PC: Install a copy of CSNET WEB in the local computer.

CSNET WEB Manual: opens the technical catalogue of CSNET WEB.

Upgrade CSNET WEB hardware: Upgrade the firmware of your CSNET WEB using our interface.

Building Layout Software: Execute the Building Layout Editor in order to use this application to create a Building

Layout file.

TCGB0106 rev.0 - 12/2014