Other Indications - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
PC-ARF

Contact Information
The contact information and the latest alarm code are displayed using this option.
1 Select "Contact Information" from the help menu and
press "OK". The contact information and the latest
alarm code are displayed then.
2 Press " " (return). The screen returns to the help
menu.
To return to the normal mode, press "

4.1.4.6 Other indications


In Normal Condition
Central control
"Central Control" is turned ON.
In case that the prohibiting operation by remote control switch is set from the
central controller, operation, temperature setting, fan speed and direction set-
ting are not available from the remote control switch.
Motion sensor control
"Motion sensor is activated" is turned ON during the motion sensor control. In
this case, the operation is performed with saving the capacity or stopped by the
motion sensor control.
Thermo-controller
The fan speed is changed to "LOW" at the thermo-controller actuation. However, the indication is not changed. (Only in the
heating operation mode).
112
TCGB0106 rev.0 - 12/2014
" (return) again.
Help Menu
About Indication
About Operation
Troubleshooting
Contact Information
OK
SEL.
Contact Information
Electric Corp.
OK
Alarm Code:22
Help Menu
About Indication
About Operation
Troubleshooting
OK
Contact Information
SEL.
A/C Meeting Room
MODE SPEED LOUV.
HEAT
MED
Central Control
Turned ON
A/C Meeting Room
MODE SPEED
HEAT
MED
Motion sensor is activated
LOUV. ADJ
Turned ON
ENT. RTN.
OK
RTN.
ENT. RTN.
OK
TEMP
LOUV. TEMP