Installation; Installation Site Selection; Components List - Hitachi PC-ARF Technical Catalogue

5 Centralised remote controls
PSC-A64GT

5.1.2 Installation

5.1.2.1 Installation site selection

Select a suitable place for handling and determine the installation place of the central station with the customer's accept-
ance.
Do not install the central station at such places as:
- Where children can touch.
- Where the air from the air conditioner is directly discharged.
Before installing a controller, prepare the following items.
Parts
Switch Box JIS Switch Box for 4 Switches (with cover) (JIS C8340)
Cable SPEC: 1.25 to 2mm
Power Supply
Cable
Recommended Cable: 600V CV, CCV, CEV
Cable SPEC: 0.75 to 1.25mm
H-LINK Cable
Recommended Cable: Twist Pair Cable with Shield,
(For Control)
Over 0.75mm
* The recommended cables are the model name of Hitachi Cables, Ltd.

5.1.2.2 Components list

Unpack the unit and check that:
• The package contains all the components (see next table).
• All components are in perfect condition.
Otherwise, contact the manufacturer.
Central station
PSC-A64GT
M4x16L screws
Touch pen
Touch pen holder
Installation and operation manual
220
TCGB0106 rev.0 - 12/2014
Specification
2
2
(Equivalent to KPEV-S)
2
Name Quantity
1 For controlling system operation
4 For fixing the central station
For activating/deactivating the touch op-
2
tions on the screen.
For holding the touch pen on the central
1
1 Installation and operation unit instructions.
Comments
station