Psc-5Hr; Safety Summary; Installation; Components List - Hitachi PC-ARF Technical Catalogue

Hide thumbs Also See for PC-ARF:

Table of Contents

8 Control support devices

PSC-5HR

C A U T I O N

DO NOT TURN ON the power source of the H-LINK Relay, control system, unless the preparation for the test running is completed.

Read this manual carefully before installation work for correct performance.

Read this manual together with the "Installation & Operation Manuals" for the controller and air conditioning equipment.

This appliance must be used only by adult and capable people, having received the technical information or instructions to handle properly

and safely this appliance.

Children should be supervised to ensure that they do not play with the appliance.

DO NOT install PSC-5HR at a place such as follows:

where there is oil vapour and the oil is dispersed.

where the hot springs are near(in a sulphuric environment)

where generation, flowing, staying or leaking of flammable gas is detected.

where the sea is near ( in the salty environment) , an acid or alkaline environment, it causes biting of the acid.

Install the unit to the place that is not facing to transmission face of electromagnetic waves:

DO NOT install the indoor unit, controller and cable within approximately 3 meters from strong electromagnetic wave radiators by such

as medical equipment.

Attach Noise Filter if there is noise generation in the unit.

Follow the local electrical standards.

Use an independent circuit to avoid the capacity shortage for power supply, otherwise it will cause electric shock or fire disaster.

Unpack the unit and check that:

The package contains all the components (see next table).

All components are in perfect condition.

Otherwise, contact the manufacturer.

Screw for wood

Installation and operation manual

TCGB0106 rev.0 - 12/2014

Installation and operation unit instructions.