Local Software Configuration - Hitachi PC-ARF Technical Catalogue

6 Building air conditioning controls
CSNET WEB (PSC-A160WEB1)

6.1.5.3 Local software configuration

After configuring the CSNET WEB interface you should begin the configuration of the system. To install the RCS Web
instead of CSNET WEB read the chapter
only remote control functions but more user-friendly for a non-expert user.
N O T E
CSNET WEB needs at least the following to be configured:
• Local software configuration (see next page)
• Area tree (see chapter Area
• Configuration of the unit (see chapter
• Auto Cool/Heat (see chapter
We recommend configuring the other points indicated in the manual at the same time, although this can be done later.
C A U T I O N
Remember that to access CSNET WEB by a shortcut you need to connect the computer to the Ethernet connection connected to the
CSNET WEB interface.
When you click on the shortcut, a page appears in which you have to specify the language you want to use. The same
screen shows a second timer (this can be configured later), which runs down to zero and then runs CSNETWEB in the
selected language.
If you wait 10 seconds or press the OK button, CSNET WEB will show the Initial Page.
432 432
TCGB0106 rev.0 - 12/2014
RCS Web. Remember that RCS Web is a reduced version of CSNET Web with
tree)
Unit settings)
Auto cool/heat)