Table of Contents
Advertisement
XG Series User's Guide
5.3.2.3
vlan igmpsnoop source
Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the IP address to be used for IGMP snooping.
XG0224 / XG0448 / XG2600
vlan <vid> igmpsnoop source <address>
<vid>
• VLAN ID
Specify a VLAN ID with a decimal value.
<address>
Specify the source IP address to be used for IGMP snooping.
This IP address is used as the source address for all IGMP packets.
Configuration mode (admin class)
Specify the source address of IGMP packets sent by IGMP snooping.
• This setting is enabled only when IGMP snooping is set to use.
This setting is ignored if IGMP snooping is not used.
• When IGMP snooping is used, set the Querier IP address.
• To make the querier operation enabled, set an address whose value is greater than the
multicast router address.
• When connecting multiple IGMP snooping devices, do not set the addresses of two or
more devices within the same VLAN.
IGMP packets are sent with the source address 0.0.0.0.
vlan <vid> igmpsnoop source 0.0.0.0
162
Chapter 5 Command Reference
VLAN Information Settings
Advertisement
Table of Contents
