Table of Contents
Advertisement
XG Series User's Guide
Be sure to restart the device to so that the restored configuration information can take effect.
Note
Enter "get reset" as a subcommand for the ftp command to restart.
To switch the configuration information, enter "get reset1" or "get reset2" and restart the device.
• When "get reset" is entered
• When "get reset1" is entered
• When "get reset2" is entered
6.2.2
Saving/restoring configuration information using a
Compact Flash Card
Available Model
You can save the device's configuration information on a CompactFlash card. If necessary, you can also restore the
configuration information saved on a CompactFlash card.
Configuration information which can be saved
•
Configuration information 1
•
Configuration information 2
The following explains how to save/restore configuration information using a CompactFlash card.
Saving configuration information using a Compact Flash Card
The following explains how to save the configuration information of this device to a CompactFlash card.
1.
Insert a CompactFlash card on which you will save configuration information into the CompactFlash
card slot of this device.
2.
Save the configuration information to the CompactFlash card.
Example
The following example saves configuration information 1 to the config1-1 file.
# copy config1 /cf0/config1-1
: The current configuration information takes effect after restart.
: Configuration information 1 takes effect after restart.
: Configuration information 2 takes effect after restart.
XG0224
: config1
: config2
564
Chapter 6 Managing the Device
Saving/Restoring Configuration Information
Advertisement
Table of Contents
