Serverinfo Telnet Filter Move; Serverinfo Telnet Filter Default - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.8.18 serverinfo telnet filter move

Function
Available Model
Syntax
Options
Use Mode
Explanation

5.15.8.19 serverinfo telnet filter default

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of the application filter for the TELNET server function.
XG0224 / XG0448 / XG2600
serverinfo telnet filter move <count> <new_count>
<count>
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
<new_count>
• Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Configuration mode (admin class)
Change the priority of the application filter for the TELNET server function.
Set the default operation of the application filter for the TELNET server function.
XG0224 / XG0448 / XG2600
serverinfo telnet filter default <action>
<action>
Specify how to handle a packet that did not match any application filter table for the
TELNET server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Configuration mode (admin class)
Set how to handle a packet that did not match any application filter table for the TELNET
server function.
A packet that did not match any application filter table is transmitted.
serverinfo telnet filter default accept
310
Chapter 5 Command Reference
Device Information Settings