Table of Contents
Advertisement
XG Series User's Guide
3)
restart_cause
Cause for the system startup.
The following system startup causes are displayed:
power on
: The power has been turned on.
reset
: The reset command has been issued.
reset switch : The [RESET] switch has been pressed.
system down : System-down has occurred.
4)
machine_state
State of the device
RUNNING
FALLBACK
5)
access_direction
Direction where a device is installed in.
front access
rear access
6)
power_redundancy
State of the redundant power unit.
single
redundant
7)
PSU1 state
State of the power unit (PSU1).
PSU2 state
Type of the power unit (PSU2).
NORMAL
NO PRESENT
NO POWER
FAIL
UNKNOWN
WARNING
8)
PSU1 type
Type of the power unit (PSU1).
PSU2 type
Type of the power unit (PSU2).
AC
--
9)
power_consumption
Power consumption of the device.
10)
FAN1 state
State of the fan module 1.
FAN2 state
State of the fan module 2.
NORMAL
FAIL
NO PRESENT
UNKNOWN
WARNING
: The device is active.
: The device is into fallback state.
: The device should be installed forward.
: The device should be installed backward.
: The device has no redundant power unit.
: The device has a redundant power unit.
: The power unit works normally.
: The power unit is not installed.
: The power unit has been turned off.
: The power unit has been abnormal.
: The power unit is invalid type.
: The power unit has been incorrectly mounted.
: The power unit is AC.
: The power unit is not installed or invalid type.
: The fan module works normally.
: The fan module has been abnormal.
: The fan module is not installed.
: The fan module is invalid direction.
: The fan module has been incorrectly mounted.
359
Chapter 5 Command Reference
System Operations and Display Commands
Advertisement
Table of Contents
