Fujitsu XG Series User Manual page 236

XG Series User's Guide
Use Mode
Explanation
Caution
Default
• TOS value
Specify the TOS value used to identify the ACL target with a hexadecimal value from 0
to ff.
• DSCP value
Specify the DSCP value used to identify the ACL target with a decimal value from 0 to
63.
Configuration mode (admin class)
Specify the IPv4 packet pattern in the ACL definition.
Make sure to define the acl ip when using L3 protocols such as TCP, UDP, or ICMP.
Any IP packet pattern can be specified in the ACL definition.
(The ACL definition is disabled if "all any" is specified or undefined.)
236
Chapter 5 Command Reference
ACL Information Settings