Acl Tcp - Fujitsu XG Series User Manual

XG Series User's Guide

5.12.1.5 acl tcp

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the definition of the ACL TCP.
XG0224 / XG0448 / XG2600
acl <acl_count> tcp <src_port> <dst_port>
<acl_count>
• ACL definition number
Specify an ACL definition serial number with a decimal value.
<src_port>
Specify a source port number for ACL.
• Port number
Specify the source port number for ACL with a decimal value from 1 to 65535.
When specifying multiple port numbers, separate them with commas (,).
Using a comma (,) enables you to specify up to 10 port numbers, including <src_port>
and <dst_port>.
The available description format is as follows:
- Decimal number from 1 to 65535 (Example: 65535 = Port 65535)
- Port number, port number, ... (Example: 10,20,30 = Ports 10, 20, and 30)
• any
Specify it when all source port numbers are subject to ACL.
<dst_port>
Specify a destination port number for ACL.
• Port number
Specify the destination port number for ACL with a decimal value from 1 to 65535.
The same is true with the description format in <src_port>.
• any
Specify it when all destination port numbers are subject to ACL.
Configuration mode (admin class)
Specify the TCP packet pattern in the ACL definition.
When using this command, be sure to specify protocol (tcp 6) in the
command.
Any TCP packet pattern can be specified in the ACL definition.
238
Chapter 5 Command Reference
"acl ip" or "acl ip6"
ACL Information Settings