Device Information Settings; Snmp Information; Snmp Service; Snmp Agent Contact - Fujitsu XG Series User Manual

XG Series User's Guide

5.15 Device Information Settings

This section explains about device information settings.
5.15.1

SNMP Information

This section explains about the commands related to SNMP information.

5.15.1.1 snmp service

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default

5.15.1.2 snmp agent contact

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the SNMP agent and SNMP trap functions.
XG0224 / XG0448 / XG2600
snmp service <mode>
<mode>
• on
Enable SNMP agent and SNMP trap functions.
• off
Disable SNMP agent and SNMP trap functions.
Configuration mode (admin class)
Set whether to enable SNMP agent and SNMP trap functions.
It is assumed that the SNMP agent function is stopped.
snmp service off
Set the administrator name for the SNMP agent function.
XG0224 / XG0448 / XG2600
snmp agent contact <syscontact>
<syscontact>
• Administrator name (sysContact value)
Specify the MIB variable, sysContact, which indicates an administrator name of this
device, with up to 40 characters.
Configuration mode (admin class)
Set the administrator name for the SNMP agent function.
It is assumed that the administrator name is not set.
262
Chapter 5 Command Reference

Device Information Settings