Snmp User Priv - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.1.21 snmp user priv

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set encryption protocol
XG0224 / XG0448 / XG2600
snmp user [<number>] priv <protocol> [<password> [encrypted]]
<number>
• User definition number
Specify the user definition number with a decimal value from 0 to 7.
The default is 0
<protocol>
Specify the encryption protocol
• none
Specify it when unusing encryption protocol.
• des
Specify when using DES (CBC-DES) as encryption protocol
<password>
Specify encrypted password
• In the case of specifying unencryption password
Encryption Protocol
des
• In the case of specifying encryption password
Specify the encrypted encryption password shown by show command with "encrypted"
Specify the characters which is shown by show command
encrypted
• Specify encrypted encryption password
Specify it when specifying encrypted authentication password in <password>
Configuration mode (admin class)
Set the encryption protocol for SNMPv3
Specify authentication protocol when using encryption protocol
It is assumed that encryption protocol is not use.
snmp user <number> priv none
8 to 16 characters
274
Chapter 5 Command Reference
Password length
Device Information Settings