Fujitsu XG Series User Manual page 482

XG Series User's Guide
(Continued)
[PORT 8]
Configuration Mode
Send LLDPDU size
Chassis ID
Port ID
Time To Live(TTL)
Port Description
System Description
2008'"
System Capabilities
Management Address
interface number subtype=2(ifIndex) info=1
Management Address
IEEE802.1
Port VLAN ID
Port And Protocol VLAN ID
PPVID=0
VLAN Name
name="default"
IEEE802.3
MAC/PHY Configuration/Status
for full-duplex links),
SNMP Notification Trap Send : disable
Entry:2
1) LLDPDU send interval time(s)
Setting value by lldp send interval command
2) LLDP hold count (times)
Setting value by lldp send hold command
3) LLDP Send delay time(s)
Setting value by lldp send interval command
4) LLDP Reinit delay time(s)
Seting value by lldp reinit delay command
5) LLDP SNMP Notification Trap interval time (s)
Setting value by lldp notification interval command
6) Physical port number
Ether port number
7) Mode
Setting value by lldp mode command
enable : send and recive
send : send only
receive : recive only
When mode is receive, information from (8) to (28) is not displayed.
8) LLDPDU (LLDP Protocol Data Unit) Size
LLDPDU size (octets)
: send
: 179 octets
: subtype=4(MAC) info=00:0b:5d:fd:05:b2ц
: subtype=5(ifName) info="8"
: 120 seconds
: info="EthernetPort(ether8)"
: info="'SBAX2' '1.2 V01.00' 'Wed Feb 13 15:23:07 JST
: info=Bridge,Router
enabled=Bridge
: address subtype=1(IPv4) info=192.168.1.1
oid=""
: address subtype=6(MAC) info=00:0b:5d:fd:05:ba
interface number subtype=2(ifIndex) info=7008
oid=""
: PVID=1
: flags=supported,disabled
: VID=1
: support/status=supported,enabled
capability=1(10BASE-T half duplex mode),
2(10BASE-T full duplex mode),
4(100BASE-TX half duplex mode),
5(100BASE-TX full duplex mode),
8(PAUSE for full-duplex links),
11(Asymmetric and Symmetric PAUSE
15(1000BASE-T full duplex mode)
type=16(100BASE-TX full duplex mode)
482
LLDP Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
---(30)
Commands