Table of Contents
Advertisement
XG Series User's Guide
Execution Example
Display of the entire route information
# show ip route all
FP
Destination/Mask
--- ---------------
(1)
(2)
*C
192.168.10.0/24
*O
192.168.11.0/24
1)
FP
The kernel flag and the protocol type are displayed.
The following shows the kernel flags that may be displayed.
*
: Indicates the route registered in the IP kernel.
Blank:
Indicates the route not registered in the IP kernel.
x : Indicates the route that cannot be registered in the IP kernel.
(The route count limit has been exceeded.)
The following shows the protocol types that may be displayed.
S : Indicates static route information.
C : Indicates the interface route information.
2)
Destination/Mask
The destination address or mask length is displayed.
3)
Gateway
The gateway address is displayed.
4)
Distance
The routing priority is displayed.
5)
UpTime
The elapsed time after the last update of route information is displayed.
01:23:45
1 hour, 23 minutes and 45 seconds have passed (if the elapsed time is within 24
hours).
6d23h45m
6 days, 23 hours and 45 minutes have passed (if the elapsed time is within 7
days).
3w6d23h
3 weeks, 6 days and 23 hours have passed.
6)
Interface
The interface name through which the gateway can be reached is displayed. If
status of the interface is invalid, its name is followed by (inactive).
Gateway
Distance
--------------
--------
(3)
(4)
192.168.10.50
0
192.168.10.20
110
432
Chapter 5 Command Reference
UpTime
Interface
--------
---------
(5)
(6)
00:00:01
lan0
00:00:01
lan0
Routing Table Entry Display Commands
Advertisement
Table of Contents
