Table of Contents
Advertisement
XG Series User's Guide
5)
Configuration
Indicates setting value of
mode (setting value):
Indicates the setting value of
mdi (setting value):
Indicates the setting value of "ether mdi" as mdi (auto).
-
: For the server port "-" will be displayed because it only supports 1000M
fixed operation.
6)
Link control information
Indicates link control information.
online : Indicates that the port runs in the online state during device startup or
during dynamic definition reflection.
offline : Indicates that the port runs in the offline state during device startup or
during dynamic definition reflection.
recovery (Upper limit: Current value):
Indicates the upper limit of the linkdown count specified in "ether
recovery limit" as well as the current linkdown count.
If the upper limit of the linkdown count is not set, the upper limit and
current value are indicated by hyphens (-) respectively.
downrelay (Link port list):
Displays link port list information when using the linkdown relay
function.
The linkdown relay function, if not used, is indicated by a hyphen (-).
"ether mode"
command and "ether mdi" command.
"ether mode"
386
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
as mode (auto).
Commands
Advertisement
Table of Contents
