Vlan Ip6Qos Aclmap Move - Fujitsu XG Series User Manual

XG Series User's Guide
Default
5.3.4.3

vlan ip6qos aclmap move

Function
Available Model
Options
Use Mode
Explanation
Default
Note 4.
Up to 700 commands can be set for the entire device, including the definitions which refer
to ACL such as "ether macfilter",
"vlan qos aclmap", "vlan ip6qos
ip6 dscp" and "serverinfo filter" commands.
N/A
Change the priority of IPv6 QoS for VLAN
XG0224 / XG0448
<vid>
• VLAN ID
Specify the VLAN ID with a decimal value from 1 to 4094
<count>
• Priority
Specify the priority with a decimal value
<new_count>
• New Priority
Specify the new priority with a decimal value
Range
0 to 511 XG0224 / XG0448
Configuration mode (admin class)
Change the priority of IPv6 QoS definition per VLAN
If the current priority is set as <count>, change the priority of this definition to
<new_count>. When the definition is changed, the priority is renumbered.
N/A
"ether qos aclmap",
aclmap", "lan ip filter",
180
Chapter 5 Command Reference
"vlan macfilter", "vlan ip6filter",
"lan ip dscp", "lan ip6 filter",
Model
VLAN Information Settings
"lan