Fujitsu XG Series User Manual page 384

XG Series User's Guide
Execution Example
B9F# show ether line 1-7
[ETHER PORT-1]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
[ETHER PORT-2]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
[ETHER PORT-3]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
[ETHER PORT-4]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
[ETHER PORT-5]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
[ETHER PORT-6]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
[ETHER PORT-7]
status : down
flow control : -
type : Normal
since : Jan
config : -
linkcontrol : online, recovery(-), downrelay(-)
XG2600#
1) Port state
Displays the speed and state when the connection has been completed.
disable: Indicates that the port is not used based on the definition.
offline : Indicates that the port is in the offline state.
Offline also indicates the following states depending on the cause:
offline (loopdetect): Port offline by loop detection function
offline (storm): Port offline by storm control function
offline (startup): Port offline by startup-time block function
offline (recovery):
Port offline by automatic recovery stop function
offline (downrelay): Port offline by linkdown relay function
1 00:00:02 GMT 1970
1 00:00:02 GMT 1970
1 00:00:02 GMT 1970
1 00:00:02 GMT 1970
1 00:00:02 GMT 1970
1 00:00:02 GMT 1970
1 00:00:02 GMT 1970
384
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
---(1)
---(2)
---(3)
---(4)
---(5)
---(6)
Commands