Configuring Bluetooth Devices - Siemens Gigaset talk & surf 6.0 Operating Instructions Manual

Configuring the base station

Configuring Bluetooth devices

Only available for Gigaset SX3x3isdn.
ì
Double-click Configuration in Folder List.
This displays the dialogues available.
ì
Click Device settings.
The corresponding tabs are then displayed.
ì
Open the Bluetooth devices tab.
ì
In the device list, click the Bluetooth device you want to configure.
This highlights the selected row. Below the device list you will see the changeable
settings.
ì
You can change the following settings:
– Enter a name with up to 16 characters for the Bluetooth connection in the Device
name field.
– In the Send MSN section, click the Name/number column. Select the MSN the
Bluetooth device is to use for setting up a connection.
ì
Click Apply.
The new settings will be sent to the base station. The device list will now be updated.
If you want to change the settings for several devices, you can select the
i
device list rows without clicking Apply. Your changes remain unaffected
while switching between devices.
Detailed description
"Device settings" on page 142
Further information
"Registering a Bluetooth device" on page 46
"Deregistering a Bluetooth device" on page 50
52