Assigning A Device For Pc Dialling - Siemens Gigaset talk & surf 6.0 Operating Instructions Manual

Assigning a device for PC dialling

ì
Double-click Configuration in Folder List.
This displays the dialogues available.
ì
Click Base settings.
The corresponding tabs are then displayed.
ì
Open the Assignments tab.
ì
Activate the Connect phone to PC option if you want to use the Action > Dial-Up
menu command in talk&surf.
ì
In the Device assignment section, select an internal device that is to react to the
Action > Dial-Up menu command.
ì
Click Apply.
The new settings are sent to the base station.
If you dial a number from your PC, the connection is set up by the assigned device.
The linked device will also be used for listening in on your answering
i
machine.
(Only available for Gigaset SX255isdn and Gigaset SX353isdn.)
Detailed description
"Base settings" on page 153
"Calling with the PC" on page 28
Further information
"Configuring the date and time" on page 59
"Configuring preferred redirection location" on page 60
"Configuring preferred holding for enquiry calls" on page 61
"Deleting log lists" on page 65
"Restoring factory settings" on page 66
"Changing the system PIN" on page 67
"Activating the waiting melody" on page 68
Configuring the base station
63