Table of Contents
Advertisement
Installing the Voice Mail Hardware
Connecting a Laptop to the Voice Mail
Voice Mail
Ports
1 & 2
COM1
20
VANGARD Mail/i-Series Quick Setup Guide
2.
Plug one end of the standard LAN style patch cable into COM1 on the VANGARD Mail as
shown in Figure 16.
Make sure you do not accidently plug the line cords for the phone
system into COM1 or COM2 on the Voice Mail. This connection may
permanently damage the COM port.
3.
Plug the other end of the cable into the RJ-45 connector on the VANGARD Mail null modem
adapter (P/N 17777).
4.
Plug the DB9 connector on the adapter into the COM port on the laptop computer.
5.
Secure the adapter in place with the attached screws.
.
Voice Mail
Voice Mail
Ports
Voice Mail
3 & 4
Ports
5 & 6
CONSOLE / COM2
(reserved for HOSTKEY use)
LAN style patch cable
(to be supplied by customer)
Figure 16: Connecting a Laptop Computer to VANGARD Mail
WARNING
Ports
7 & 8
supplied
adapter
Chapter 2: Installing the Voice Mail
Ground
Stud
VAN-C11
Advertisement
Table of Contents
