Table of Contents
Advertisement
Assigning Extensions to VANGARD Mail Ports
Assign ing Extensions to the VANGARD Mail Ports
Default
Modifications to Default
Programming
Chapter 4: Voice Mail Programming
Assigning Extensions to the VANGARD Mail Ports
For certain features to work properly, you must assign each Voice Mail extension number (in the
phone system) to its corresponding VANGARD Mail port.
No extensions assigned
In the space provided, enter the phone system extension number that is connected to the Voice Mail
port.When you are finished, go to the Programming instructions below.
Port 1:
Extension __________
Port 2:
Extension __________
Port 3:
Extension __________
Port 4:
Extension __________
Port 5:
Extension __________
Port 6:
Extension __________
Port 7:
Extension __________
Port 8:
Extension __________
1.
From the MAIN MENU - > prompt, select CU and then press Enter.
Enter the password (the default password is CTL), if requested and press Enter.
2.
The Customize Database Menu will be displayed.
3.
At the CUSTOMIZE - > prompt, press PO and press Enter.
For Voice Mail port 1, press Enter until you see
4.
Extension (N-None)
5.
Enter the phone system extension number that is physically connected to the Voice Mail port.
Press Enter.
6.
Repeat steps 4 and 5 for each port in the Voice Mail.
When you are finished and are at the CUSTOMIZE - > prompt, press E and Enter to return
7.
to the Main Menu.
Basic Voice Mail Programming
VANGARD Mail/i-Series Quick Setup Guide
39
Advertisement
Table of Contents
