Table of Contents
Advertisement
Connecting the Voice Mail to a Phone System
Connecting Digital VANGARD Mail Ports
26
VANGARD Mail/i-Series Quick Setup Guide
4.
Terminate the WHT/BLU - BLU/WHITE leads to the RED and GRN lugs in a 625 modular
jack assembly.
5.
Repeat steps 1 through 4 for each pair of digital Voice Mail ports that you are connecting.
Make sure you do not accidently plug the line cords for the phone
system into COM1 or COM2 on the Voice Mail. This connection may
permanently damage the COM port.
6.
Plug a surge protector into the dedicated and grounded electrical outlet.
7.
Plug the AC adapter into the surge protector.
8.
Plug the connector from the AC adapter into the 18VDC jack on the Voice Mail
Both the green PWR light and yellow BUSY light will be lit.
As soon as the Busy light goes out, the system is ready for use.
9.
Go to the section, "Initializing the Voice Mail for Your Phone System" on page 33.
WARNING
Chapter 2: Installing the Voice Mail
Advertisement
Table of Contents
