Manager Extension; Message Waiting - Panasonic KX-TD816 Installation Manual

3
Features
M
M
anager Extension
.
Description
Conditions
Programming
One
extension in the system can be assigned as the system
manager. This extension can perform System Programming.
l
Besides the manager extension. the extension that is connected to the
jack
I
is able to perform System Programming.
l
If extra Device Port mode is enabled at the manager extension. the
proprietary telephone user is regarded as the manager.
References
Section 4, System Programming,
[006] Operator / Manager Extension Assignment
Feature References
None
Operation References
Not applicable.
Message Waiting
Description
The system supports the ability to inform the called party of a
message waiting. The user, with a MESSAGE button. knows there
is a message if the LED of the MESSAGE button is lit red. If the
button is not provided nor assigned. the called party hears special
dial tone, when he / she goes off-hook. Pressing the lit MESSAGE
button also means to call back the called party or listen to the
messages which are stored in the mailbox of the Voice Processing
System.
Conditions
For the proprietary telephone which is provided with no MESSAGE
button, a flexible CO button can be assigned as the
MESSAGE button
either by System or Station Programming.
Cancelling
the message can be performed from the extension setting it
or from the extension receiving it.
The system supports a maximum of 128 simultaneous messages.
Messages are always left on the original extension. It is not sent to a
Call Forwarding or Station Hunting destination.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[
1001 Flexible Numbering, Message waiting set / cancel / callback
Station Programming . . . . . . . . . . . . . . . . . . . .
. , . . . . . . . . . . . . . . . . . . . ..,. . . . . . . . . . .
User Manual,
Flexible Button Assignment - Message Waiting (MESSAGE) Button
Features
3-83