Cos Programming - Panasonic KX-TD816 Installation Manual

500-501
47 0 COS Programming
Toll Restriction Level - Day / Night
Description Each extension must be assigned a Class of Service (COS). These
programs set the toll restriction value for each COS in day or night
mode.
Selection
l
COS number:
1 through 8, * ( *
=a11 COS)
l
Level number:
1 through 8
Default
All COS - Level
1
- Day / Night
Programming 1.
2.
3.
4. Enter a
level number.
5.
6.
To change the current entry, press CLEAR and the new number.
Press
STORE.
To program another COS, press
NEXT
or
PREV,
or
SELECT
and the desired COS
number.
7.
8.
Repeat steps 4 through 6.
Press
END.
Enter
a program address (500 for day or 501 for night).
Display example: TRS Level Day
Press
NEXT.
Display : COS NO?->
Enter a COS
number.
To enter COS number 1, you can also press NEXT.
Display example: COSl:l
Conditions
l
To
assign all COS to one selection, press the * key at step 3.
In this
case, the display
shows the contents programmed for COS 1.
l
Program [601] "Class of Service" is used to assign a Class of Service
to
each extension.
Feature References Section 3, Features,
Night Service
Toll Restriction
4-96
System Programming