Panasonic KX-TD816 Installation Manual page 325

409-410
45 0
CO Line Programming
;
which
Intercept Extension - Day /Night
Description
Intercept Routing provides an automatic re-direction of call:
cannot or have not been answered. These programs set the
destination in both day and night modes for each line group.
Selection
l
CO
line group (TRG) number:
1 through 8, *
( *
=a11 CO line groups)
l
Extension number: 2
through 4 digits / Disable
(no Intercept
Routing)
Default
All CO line groups - Disable - Day / Night
Programming 1.
2.
3.
4.
5.
6.
7.
8.
Enter a
program address (409 for day or 410 for night).
Display example: TRG Intercpt Day
Press
NEXT.
Display: TRK GRP NO?->
Enter the CO
line group number.
To
enter CO line group number 1,
you
can also press NEXT.
Display example: TRG1:Disable
Enter an
extension number.
To
change the current entry, press CLEAR and the new number.
To disable Intercept Routing, press CLEAR.
Press
STORE.
To program another CO line group, press
NEXT
or
PREV,
or
SELECT
and the desired CO
line group number.
Repeat steps 4 through 6.
Press
END.
Conditions
l
You set the extension
numbers in program
[003] "Extension Number
Set" or floating numbers of pagers, DISA* messages in program [8 131
"Floating Number Assignment." You cannot assign the floating
number of the modem.
l
To assign all CO line groups to one selection, press the * key at step 3.
In this case, the display shows the contents programmed for CO line
group 1.
l
Program [401] "CO Line Group Assignment" is used to assign each CO
line to a CO line group.
Feature References
Section 3, Features,
Intercept Routing
4-88
System Programming
*: Available for KX-TD1232 only.