2.4.7
Caller ID Card Installation
A maximum of two Caller ID Cards (KX-TD 193) can be installed
to the KX-TD8 16, and a maximum of three Caller ID Cards can be
installed to the KX-TD1232.
The Caller ID Cards can be installed
to the initially provided CO Line Card and/or to an optional 4-CO
Line Unit (KX-TD180),
as required.
The CO Line Card of KX-TD816 can attach one Caller ID Card,
and the CO Line Card of KX-TD1232 can attach two Caller ID
Cards. 4-CO Line Unit can attach one Caller ID Card.
(1) Installing to the Initial CO Line Card
KX-TD816
1. Loosen four screws to open the inside cover of the main unit.
Note
If any cards,
units, or cords are installed to the main unit,
remove
them beforehand.
2. Attach the Caller ID Card to the CO Line Card, fitting the
connectors.
One card can be installed to the initial CO Line Card.
_
CO Line Card
Caller ID Card
3. Put the inside cover back on the main unit and secure the
screws.
2-50
Installation