Panasonic KX-TD816 Installation Manual page 347

605-606
4.8
Extension
Outgoing Permitted CO Line Assignment -
Programming
Day /Night (cmd.)
Conditions
l
In the case of RX-TD 1232, jack numbers 0 1 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
l
For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
l
To assign all jacks or all CO lines to one selection, press the * key at
step 3 or 4. In these cases, the display shows the contents programmed
for Jack 0 1 or COO 1.
l
To assign no CO line group for a station, press CLEAR at step 4.
Feature References
Section 3, Features,
CO Line Connection Assignment - Outgoing
Night Service
4-l 10 System Programming