Panasonic KX-TD816 Installation Manual page 317

401
45
l
CO Line Programming
CO Line Group Assignment
Description Each CO line must be assigned to a CO line group. This program
defines the CO line group assignment for each CO line. For
example, if there are multiple telephone service companies
available, the CO lines can be grouped by company.
Selection
l
CO line (CO) number:
RX-TD8 16;
01 through OS, * ( *
=a11 CO lines)
RX-TD1232;
01 through 24, * ( *
=a11 CO lines)
l
CO line group (TRG) number:
1 through 8
Default COO1 - TRG 1; COO5 - TRG 5;
COO2 - TRG 2; COO6 - TRG 6;
COO3 - TRG 3; COO7 - TRG 7;
COO4 - TRG 4; COO8 - TRG 8 (for RX-TD816)
COO8 through CO24 - TRG 8 (for KX-TD1232)
Programming
1.
Enter 401.
Display
:
Trunk Group Asn
2.
Press
NEXT.
Display: CO Line NO?->
3.
Enter a CO
line number.
To enter CO line number 01, you can also press NEXT.
Display example: COOl:TRGl
4.
Enter the CO line group number.
To
change the current entry, enter the new CO line group number.
5.
Press
STORE.
6.
To program another CO line, press
NEXT
or
PREV,
or
SELECT
and the desired CO line number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
l
In the case of KX-TD1232, COO1 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
l
To assign all CO lines to one CO line group, press the * key at step 3.
In this case, the display shows the contents programmed for COO 1.
Feature References
Section 3, Features,
CO
Line Group
4-80
System Programming