Panasonic KX-TD816 Installation Manual page 8

Telephone Company and F.C.C.
Requirements and Responsibilities.
(b) Changes in Telephone Company Communications Facilities, Equipment, Operations
and Procedures.
The Telephone Company may make changes in its communications facilities,
equipment, operations or procedures, where such action is reasonably required in the
operation of its business and is not inconsistent with the rules and regulations in FCC
Part 68.
If such changes can be reasonably expected to render any customer Terminal
Equipment incompatible with Telephone Company Communications Facilities, or
_^_.. :,, _,.rl:~,...*:,, A..
.-.l* ,..,4:,,
,f
,..,.l. T-,:-,1 r!-..:--_-L
1cqu11c IIIuuIlILLllluIl VI clllclallull Ul >ULlI lcllllllliil cyu1p111tm1, or oti=lewise
materially affect its use or performance. the customer shall be given adequate notice
in writing, to allow the customer an opportunity to maintain uninterrupted service.
Notify the Telephone Company
Installation must be performed by a qualified professional installer.
Before connecting this equipment to any telephone, call the telephone company and
inform them of the following:
Telephone numbers to which the system will be connected . . . . . . .
Make . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Panasonic
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KX-TD8 16/
KX-TD1232
FCC Registration No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . found on the bottom of
the unit
Ringer Equivalence No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4B
Facility Interface Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02LS2
Service Order Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.OF
Required Network Interface Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RJ 14 C
Note
:
This equipment has been tested and found to comply with the limits for a Class A
--i7 -
digitai device, pursuant to Part i5 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
8 System Outline