Executive Busy Override - Panasonic KX-TD816 Installation Manual

505 47
0
COS Programming
Executive Busy Override
Description
Determines which Classes of Services (COS) are allowed to
perform Executive Busy Override - CO Line / Extension.
Executive Busy Override allows the user to intrude into an
established call.
Selection
l
COS number: I
through 8, * ( *
=a11 COS)
l
Disable / Enable
Default
All COS - Disable
Programming 1.
Enter 505.
Display: Busy Override
2.
Press
NEXT.
Display: COS NO?->
3.
Enter a COS
number.
To enter COS number 1, you can also press NEXT.
Display example: COSl:Disable
4.
Keep pressing
SELECT
until the desired selection is
displayed.
5.
Press
STORE.
6.
To program another COS, press
NEXT
or
PREV, or
SELECT
and the desired COS
number.
7. Repeat steps 4 through 6.
8.
Press
END.
Conditions
l
To assign all COS to one selection, press the * key at step 3. In this
case, the display shows the contents programmed for COS 1.
l
Program [601] "Class of Service"
is
used to assign a Class of Service to
each extension.
Feature References Section 3, Features,
Executive Busy Override - CO Line
Executive Busy Override - Extension
4-100 System Programming