Panasonic KX-TD816 Installation Manual page 454

46 .
CO Line
Programming
417
CO Line Name Assignment
Description
Assigns names of the company or customer to each CO line so that
the operator or extension user can find the destination which the caller
is trying to reach before answering. If Caller ID is assigned, each
extension can select either the initial display, Caller ID or line name.
Selection
l
CO line number:
KX-TD816 -
01 through 08, * ( *
-all CO lines)
KX-TD1232 -
01 through 24, * ( *
=a11 CO lines)
l
Name:
10 characters (max.)
Default All CO lines - Not stored
Programming
1.
2.
Enter 417.
Display: 417 CO LINE NAME
Press
NEXT.
Display : CO Line
NO?+
Enter a CO
line number,
To enter CO line
number 01, you can also press NEXT.
Display example: C001:Not Stored
Enter a
name.
3.
4.
5.
6.
7.
8.
Conditions
.
For entering
characters, see Section 4.1.3 "Entering Characters."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
Press
STORE.
To program another CO line, press
NEXT
or
PREV,
or
SELECT
and the desired CO
line number.
Repeat steps 4 through 6.
Press
END.
[n
the case of KX-TD1232, COO1 through CO1 2 are for the Master
System and CO 13 through CO24 are for the Slave, if available.
I'here is a maximum of 24 names. Each name has a maximum of 10
:haracters.
To assign all CO lines to one selection, press the * key in step 3. In
JGs case, the display shows the contents programmed for COOl.
You
can select the initial display, caller ID or CO line name, by Station
Programming.
Section 3, Features,
Display, Call Information
Feature References
67