Day /Night - Panasonic KX-TD816 Installation Manual

603-604
48
0
Extension Programming
DIL 1:N i!&tension and Delayed Ringing -
Day /Night
(contd.)
8.
Repeat steps 4 through 7.
9. Press
END.
Conditions
.
.
.
.
An extension can be assigned as the destination of as many CO lines as
is required.
In the case of XX-TD 1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
To assign all jacks or all CO lines to one selection, press the * key at
step 3 or step 4. In these cases, the display shows the contents
programmed for Jack 0 1 or for CO line 0 1.
There are six notification methods:
(1) Immediate ringing: rings immediately
(2) 1 ring delay
(3) 3 rings delay
(4) 6 rings delay
(5) No ring: only the indicator flashes
(6) Disable: no incoming call
When you change the jack number by pressing
NEXT
or PREV, the
CO line number is not changed. Example #03-l:COO6.....Press
NEXT.....##O3-2:C006
Feature References
Section 3, Features,
Direct In Lines (DIL)
Ringing, Delayed
Night Service
4-108
System Programming