2.4.8
Doorphone and Door Opener
Connection
To connect up
to
two doorphones
(KX-T30865)
and up to t&o door
openers (user-supplied),
a Doorphone
Card (KX-TD160) is
required.
Installing the Doorphone
Doorphone Card Installation
1. Loosen the screw to separate
doorphone
into two halves.
the
1. Connect a 4-conductor
modular connector
to the Doorphone Card Cabinet, and pass
the cord through the groove on the cabinet:
2. Install the base cover to the wall with two
screws.
H
Note
Two kinds of screws are included.
Please choose an appropriate one
depending on your wall type:
----- Type 1: When the doorphone
plate has been fixed to
the wall.
@=-------
Type
2:
When you wish to
install the doorphone
directly to the wall.
3. Connect the wires from the terminal box to
the screws located in the front cover.
To the terminal box (See
the following page.) +
4. Secure both halves together and re-install the
screw.
2.
3.
Attach the Doorphone Card Cabinet to the
main unit and press it down.
Connect the cord to the Doorphone Card
Connector.
KX-TD1232
KX-TD816
To Terminal
-*
Box
Installation
2-53